Adopting the Q-Switch ND YAG model, the equipment uses YAG to emit high energy instantaneously smashing the pigment of pathological tissues, namely the YAG leading explosive effect: High energy emits instantaneously, making particular wavelength penetrating the epidermis and getting into pathological pigment tissues in only 6 nms. Then pigments expand at top speed and explode. The superficial epidermis would be bounded out of the body; another part of the pigments would split into granules which would be engulfed by macrophages, then excluded by the lymphatic system finally. The pigment becomes shallow and gradually finally disappears while the surrounding normal skin tissues keep sound as they do not absorb particular wavelength.
1. Pigment skin pathological changes, pigmentation caused by color pigment mixture, corium spot, freckle, mole, birthmark, nevus of Ota, etc.
2. Specialized in removing red capillary, coffee, brown, and other colorized tattoos.
3. Effectively remove all kinds of embroidered eyebrows, soak lip, eye lines, and lip lines.
The system gem-adjusting Q switch can effectively cure the mixed pigments by pigment precipitation of extraneous source with pathological pigment change of endogenous source, inclusive of erroneous dark eyebrow-embroidery, lip-embroidery, lip-soak, eye line-embroidery, lip-line, tattoo (inclusive of tattoo by extraneous wounds), pigment precipitation by sensitive source, a freckle on female's face (male's), coffee spot, old age spot, black mole, and a birthmark in black, blue, purple, brown, red and etc. Operation course for different illness cases as follows:
Operation course required ( cure times) Operation course interval Remark (requirements in surgery)
eyebrow-embroidery(eyeliner grain) 1 –2 times 30-60 days Eyebrow blow, eyeball protection
Eyebrow-embroidery ( eyeliner embroidery) 1-3 times 45-60 days Eyebrow blow, eyeball protection
Lip line (red dyed lip) 1-3 times 15-45 days Use 532 filter
Tattoo(caused by extraneous wounds) 1-4 times 30-60 days Blood infiltration will be fine on wounds
Freckle, age spot 1-4 times 15-30 days Blood infiltration will be fine on wounds
Birthmark, nevus/mole 3-7 times 45-90 days Must have Blood infiltration.
(1）Operation for a tattoo on the eyebrow
The customer could not open their eyes during the Operation, so the operator should adjust energy according to the depth of the tattoo color, hold the handle, and move it to the Operation area slowly to make the customer feel acceptable mentally. Right now, the speed of the flash could be set to 3HZ, keep the head of the handle a two-finger distance from the Operation area, and start Operation from the head of the eyebrow to the end of the eyebrow. It is needed to treat again in 5-10 minutes if the color of the tattoo re-appear.
(2）Remove eye line
The speed of flashes could be set to 4-5HZ, adjust the energy of light to minimum energy, and keep a one-finger distance between the head of the handle and the Operation area. The operator should strictly protect customers’ eyes with panels for eyelids or medical pledges (panels for eyelids)of 1cm depth.
The operation should be started from the down eye line, customer should deeply close their eyes and keep their eyeballs up-sight inside. The operator should press the pledget (panel for eyelid) with a forefinger and push up the eyelid, peel down the eyelid with a middle finger to bare the eye line and treat it with flashes of 4-5Hz. Then, treat up the eye line. Also, customers should close their eyes and keep their eyeballs down-sight inside. The operator should press the pledget (panel for eyelid) with the middle finger and push the eyelid down, push the eyelid up with the forefinger to bare the eye line, and treat it with flashes of 4-5Hz.
(3）Remove lip line
The speed of flashes could be set 5Hz, keeping a 3/4 finger distance between the head of the handle and the Operation area. It is better to remove black, coffee, deep, red, and brown lip lines with 1064 heads the first time and then, treat again with 532 heads.
Notice: All tattoos on lips should be treated within 6 months after making. OR removal Operation will fail. It should have 45-60 days intervals to continue the next Operation until remove all.
(4）Remove the tattoo
The speed of flashes could be set 3Hz/5Hz. It is better to use high energy for Operation until the Operation area seeps a little blood. It should have a 45-90 days interval to continue the next Operation until removed.
(5）Remove spot and nevus
The speed of flashes could be set 3Hz/5Hz. Keep a 3-4 fingers distance between the head of the handle and the Operation area. It is better to use high energy for Operation until the Operation area seeps a little blood. It is advised to use 1064 heads for normal spot and nevus Operation, but for deep color spot and nevus, it is better to use 532 heads for Operation. It should have a 15-30 days interval to continue the next Operation until removed.
(6）Remove the birthmark
The speed of flashes could be set 3Hz/5Hz. It is better to use high energy for Operation until the Operation area seeps a little blood. It is advised to use 1064 heads for birthmark Operation, but for the red and deep color birthmarks, it is better to use 532 heads for Operation. It should have 45-90 days intervals to continue
Cooling condition: wind system+closed circulating+cooling system
type: Q-switch Nd YAG With RED target light to aim at the skin.
The pulse energy: 0~2000mJ
Frequency:1-5Hz continuous adjustable
Tips: 1064 nm & 532 nm and black doll tips
1 x Main Unit
1 x Hand-piece
2 x Tips
1 x Black doll tip
1 x Water funnel
2 x Goggles (1 for operator, 1 for customer)
1 x Footswitch
1 x Holder
1 x Power line (we stock 110V-240V power version and US.UK.UA.EU plugs for the country all of the world)
All machines over 4kgs:
1 year for the main machine, 3 months for spare parts.
Lower than 4kgs: 3 months.
Q: Is Safe to Order Here?
Yes, we have over 10 years of experience, we sell to America, Canada, Europe, Japan and Australia.
If you have any questions just contact me via email or WhatsApp freely, happy to help you.
Q: Do I Have a Coupon For the Order?
Yes, we can do discounts or send free gifts according to the order amount, more order the better price
Q: How Long Is Shipping?
After we ship, 3-7 working days can arrive
Q: Do You Offer Manual And Video?
Yes, we have a manual and video for operation, after you place an order we will send you via email.
Q: What Special Service Do You Offer?
We can do drop shipping and wholesale, contact me if you are interested
Q: Do You Do Customized?
Yes we can do customized machine and private logo
Q: Do You Do Financing?
We accept full payment and then arrange the order
Q: How To Follow My Order After Payment?
We will send an email to you about the shipping time, and tracking after you place the order
Q: Should I Need To Pay Attention After Getting The Package?
Yes, firstly, please check the item to confirm it well before you sign it. If the item is damaged, can get compensation from the shipping company and contact us also.
Q: Customs Fee
Because all country duties/taxes are different, all our price is not including destination import taxes. Please note that.
Q: How to Return?
Our policy lasts 15 days. If 15 days have gone by since your purchase, unfortunately, we can’t offer you a refund or exchange.
To be eligible for a return,
- Your item must be unused and in the same condition that you received it.
- It must also be in the original packaging.
- The buyer pays for return shipping.
When we get the item returned and checked with no problem, refunds will be arranged within 2 working days.